Ring Tones Instructions

Siemens instructions Nokia instructions Ericsson instructions

Siemens instructions

Program instructions for C25

	Keys 1-7 correspond to the notes C, D, E, F, G, A, H.
	Set the octave.
	face=Arial size=2>Set a pause (P = Pause).
	Switch to semitones.

The note duration is determined by the time that the button is pressed.

Example for Dis2(1/16)
D = note D, press key 2
is = semitone, press key *
2 = second octave, press # for changing octave
(1/16) = lenght tone, note duration is determined by the time the key is pressed that corresponds with the note

Program instructions for C35

	Keys 1-8 correspond to the notes C, D, E, F, G, A, B and C. If you hold down the keys, the length of the note will change. From 1/16 to 1/8, 1/4 etc.
	Set a pause (P = Pause).
	Changes octaves.
	Change to semi-tones.
	Correction.
	Save the melody you have composed.
	Listen to the melody you have composed.

The note duration is determined by the time that the button is pressed.

Example for Dis2(1/16)
D = note D, press key 2
is = semitone, press key #
2 = second octave, press * for changing octave
(1/16) = lenght tone, note duration is determined by the time the key is pressed that corresponds with the note

Program instructions for S25

	Keys 1-7 correspond to the notes C, D, E, F, G, A, H.
	Play and rewind the melody.
	Set notes higher or lower.
	One actave higher.
	One octave lower.
	Set a pause (P = Pause).
	Switch to semitones.
	Melodies Menu for saving, deleting, playing, inserting notes, etc.

You can set the tone length with the left side key.

Example for Dis2(1/16)
D = note D, press key 2
is = semitone, press key #
2 = second octave, press 8 (up) or 0 (down) for changing octave
(1/16) = lenght tone, change with left side key

Program instructions for S35

	Keys 1-7 correspond to the notes C, D, E, F, G, A and B.
	Play the melody and rewind.
	Increase length of note.
	Reduce length of note.
	One note higher.
	One note lower.
	Insert a pause (P = Pause).
	The octaves are changed with the keys on the left side of the phone: Upper key: Higher Lower key: Lower
	Melodies Menu for saving, deleting, playing, inserting notes, etc.

You can set the tone length with the left side key.

Example for Dis2(1/16)
D = note D, press key 2
is = semitone, press 9 or # key.
2 = second octave, press upper or lower left side key for changing octave
(1/16) = lenght tone, change with 0 (increase) and 9 (decrease) key

(source: Siemens C25, C35, S25 and S35 PDF User's Guide)

Nokia instructions

Creating a new ringing tone

When you enter this function, the tone that you created previously is shown, if available. To enter a new or edit an existing tone:

Enter the desired notes. For example,
press

for note f. The phone plays each note after it is entered (unless the phone tones are off).

To adjust the characteristics of the note, do as follows:

Note duration:shortens (-) and lengthens (+) the duration of the note or rest. The default duration is 1/4. The duration is shown in front of the note, e.g. 16d denotes a note d with duration 1/16.
Pressing and holding a note key lengthens the note by half, indicated by a dot after the duration, e.g. 8.a.
Rest: inserts a rest (i.e. pause) of the same duration as the previous note. The default duration of a rest is one quarter note (1/4). The rest is indicated by the - character.
Octave: sets the octave for new notes. The octave is shown as a number after the note (e.g. e1).
Pitch: makes the note sharp (indicated by # in front of the note), e.g. #f. The pitch selection is not available for notes e and b.

To edit the notes, do as follows:

and move the cursor right and left, respectively.
deletes a note or a rest to the left.

After you have completed the note, press (Options), choose one of the functions below, and press (OK).

Ericsson instructions

Look in the table underneath to understand which notes and other notation corresponds to which keys.

Press this: To:

1..9 insert notes, where 1 gives a C and 9 a high D. (If you hold down a key, you make the note long.)

# increase or decrease the pitch in half tone steps.
Press once to sharp (#), twice to flat (b), three times to get the normal pitch.

* insert a short pause (1/8).

Ť
ť scroll within the melody. Press and hold to get to the beginning or end of the melody.

0 get either a higher or a lower octave for the note you have inserted. You know it is higher as a plus sign is added in front of the note name.

CLR erase the note to the left cursor. If you press and hold CLR, the whole melody is erased.

Keypad functions